Features:
The PZ-ZM1200.1D 4 is a 1channel amplifier with1500 Watts peak output, 1000 Watts RMS power (1CHx 1000w@1Ohms)&1chx 600 Watts RMS @ 2 Ohms. Here at PUZU we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
The PZ-ZM1200.1D has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust, chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish. One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. PZ-ZM1200.1D features a 3*30 Amp Maxi Fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the PZ-ZM90.4 you are getting your money’s worth and then some.
Parameters:
Max output power 1ohm(watts) 1500W*1CH/1000W RMS*1CH
Max output power 2ohm(watts) 1200W*1CH/600W RMS*1CH
THD<0.02%
Frequency responds(±2db) 10-300Hz
Signal to noise ratio>96dB
Sensitivity 320mV-6V
Fuse box:30A*3
Dimensions:300X165X50(mm）
